Hey everyone,

Ever since I started upgrading headphones, from any brand, I noticed they all use internal wiring made of really poor materials, and the only explanation I had was cost cutting.

Here I’m talking about hifiman headphones.
I’ve already upgraded these models:
HE400se V1 & V2
HE500 OG
HE6se V1 & V2
Edition Xs
Edition XV
Ananda
Ananda Nano

https://iem-world.com/ar/ABrDORq

and they all share the same internal wiring.

Hifiman Arya Stealth internal cable upgrade

In a moment you’ll see what I found inside the Arya Stealth.

This is how it arrived from the customer:

Hifiman Arya Stealth internal cable upgrade
Hifiman Arya Stealth internal cable upgrade

Here I removed the screws holding the driver inside the cup

Hifiman Arya Stealth internal cable upgrade

I took off the frames, or rings,
and there was the surprise. The wiring is different from any of their headphones I’ve worked on before,
and sadly, even with the difference it’s still bad. A headphone like this deserves better 😡

Hifiman Arya Stealth internal cable upgrade
Hifiman Arya Stealth internal cable upgrade

Here you have to carefully remove the mesh, the fabric covering the driver, so it doesn’t get damaged, because part of the cable runs under it

Hifiman Arya Stealth internal cable upgrade

Here I desoldered the driver and pulled out the plug with its wires to remove them

Hifiman Arya Stealth internal cable upgrade

It takes a while. In short, I remove the wire with the soldering iron, then pull off the factory solder with a wick made for the job, so I can make the joint with the solder I use,
which is the best solder in the world: the German MUNDORF® MSolder SUPREME
gold + silver + copper + pure tin.
It’s one of the things that makes a real difference in any upgrade I do

Hifiman Arya Stealth internal cable upgrade

Here I installed the wire the customer ordered, OFHC high conductivity copper,
which is what I recommend, and I mean strongly recommend, for this headphone in particular

Hifiman Arya Stealth internal cable upgrade
Hifiman Arya Stealth internal cable upgrade

And here it’s connected to the drivers

Hifiman Arya Stealth internal cable upgrade
Hifiman Arya Stealth internal cable upgrade

And here’s the pre-final test of the driver, to make sure it works and the sound comes through properly before closing the headphone

Hifiman Arya Stealth internal cable upgrade

Thank God, once I’ve confirmed everything is fine,
the driver goes back in the cup and I start closing it up

Hifiman Arya Stealth internal cable upgrade
Hifiman Arya Stealth internal cable upgrade
Hifiman Arya Stealth internal cable upgrade

What I noticed after the upgrade:
– The sub-bass goes much deeper than before.
– Stage depth improved.
– Note weight went up overall (for the better).
– The highs relaxed, they’re less aggressive now.
– The headphone sounds more musical, without losing detail.

And finally,
may God bless this headphone for its owner.
It’s a gem, mashallah.

Best regards,
IEM World

In the market

No listing for this product right now.

Alert me when listed

Subscribe and get every new article by email

You'll get an email to confirm. Click the button in it to activate your subscription.

Comments

Leave a Reply

Sign In

Register

English letters only. It can't be changed later.
An Arabic name shown on your listings instead of your username. Arabic letters and numbers only, 3 to 25 characters. It is saved once and cannot be changed later.

Reset Password

Please enter your username or email address, you will receive a link to create a new password via email.